Melamine Foam Board

Enworld Fireproof Melamine Foam Board Introduction:

Enworld fireproof melamine foam board has very strong flam retardancy. That is because Enworld melamine foam board is only exposed to open flames. In the case of the surface starts to burn. However, once the combustion is initiated, a large number of inert non combustible gases are generated to slow down the combustion. At the same time, a compact coke layer is rapidly formed on the surface of the combustion chamber, thereby blocking the development of combustion to the depths. The fire went out automatically after the fire left. 

Although the traditional inorganic materials, such as asbestos fiber and glass fiber, are not burning also, but it is easy to dust and cause cancer and endanger human health, which has been limited to use by many industries and countries. Most of the traditional foam plastics are easy to burn and are toxic. Melamine foam board is the solution to these two problems and can be used by them.

Different thickness of fireproof melamine foam board

Enworld Melamine Foam Board Standard:

As a scientific evaluation criterion, without flame retardants, Enworld melamine foam board can be achieved Germany DIN 4102 Prescribed B1 low flammable material standard. UL94-V0 Level high flame retardant material standard. (American insurance association standard). However, the general foam plastic, such as Polyolefin, polystyrene, polyurethane, etc., because of their own flammability, in order to comply with the relevant flame-retardant regulations and standards, often need to add flame retardant. Many of the flame retardants will be heated and volatilized at high temperatures and release toxic gases that injure the health of people, causing the second time disasters and environmental pollution in the case of fire.

Different colors of melamine foam boards

Enworld Melamine Foam Board Index of Dripping And Smoke Density:

As the two important index of material combustion evaluation, it is also often neglected by users, that is the dripping and smoke density of materials during combustion. General foam plastics, such as polyethylene, polystyrene and polyurethane, melt and produce droplets during the combustion, and the burning drops will quickly cause the spread of the fire. The flame retardant modification is powerless for the fatal defect of the above material. At the same time, polystyrene and polyurethane produce a large number of toxic smog during the combustion process. The flame retardant modification and the addition of smoke inhibitors often lead to the increase of toxicity and the improvement of the cost. Enworld melamine foam board is burnt in the process of coking without producing drops. The amount of smoke generated is much lower than polyethylene, polystyrene and polyurethane, and the toxicity also is much smaller than polyethylene, polystyrene and polyurethane materials.

The details of Enworld fire resistance melamine foam board

Enworld Fireproof Melamine Foam Board Application:

Enworld melamine foam board is widely used in Aircraft, high-speed trains, sports venues, concert halls, airports, etc. Because this kind of place require the acoustic performance and fire resistance is much higher, also requirements for functional and decorative properties of materials. However, Enworld melamine foam board has all above properties at the same time.

White melamine foam board

1. From the view of fire protection, the materials should have the characteristics of fire resistance. Enworld melamine foam board for the flame retardant class can reach UL94-V0 high flame retardant material standard.  

2. Losolation and absorption of sound: Enworld melamine foam board’s Soundproof coefficient: 0.95, because vehicle noise mainly comes from four aspects: engine vibration, wheel to ground friction, air whistle and car body resonance. One of the important indicators of vehicle quality is noise elimination, in addition to improving chassis rigidity and eliminating low-frequency resonance area in design. It is mainly eliminated by isolation and absorption.

3. From the point of energy conservation, the materials required are lightweight. Enworld melamine foam board density just at 4-12kg/m3, The weight can less 50%-70% than EPS Expanded polystyrene foam.

4. Decorative performance: The density is 2-8kg/m3 of Enworld melamine foam board After hot pressing, cutting and fabric compounding, then can get all kinds of sound absorbing shape such as relief, Pyramid and wedge.

Light grey melamine foam board

In a word, the characteristics and advantages of Enworld melamine foam board and its various multifunctional composite materials provide essential materials for improving the noise prevention, reliability and energy conservation of traffic tools.